Description
- Waveshare Core405R STM32F4 Core Board
- Integrates essential components for STM32F4 development
- Supports JTAG/SWD programming and debugging
- Features versatile power supply options and boot selection
- Offers extensive MCU communication interfaces
- Provides easy access to all I/O ports via pin headers
The Waveshare Core405R STM32F4 Core Board is a development platform designed for the STM32F405RGT6 microcontroller, facilitating application development within the STM32F family. It integrates essential components such as a clock circuit and USB control circuit, with all I/O ports accessible via pin headers. The board supports JTAG/SWD programming and debugging interfaces, allowing for seamless integration into application boards. It features a power supply switch and boot mode selection, enhancing its versatility for various development needs.
View moreWhat’s Included
- 1x Waveshare Core405R STM32F4 Core Board
- 1x USB Type A to Mini-B Cable
Dimensions
Links
Website
Core405R, STM32F4 Core Board – Core405R Wiki
Specifications
- STM32F405RGT6: High-performance STM32 MCU
- Core: Cortex-M4 32-bit RISC
- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP64
- Memories: 1MB Flash, 192+4kB SRAM
- Communication Interfaces: 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN
- USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY
- USB HS ULPI (external PHY required)
- AD & DA Converters: 3 x AD (12-bit, 1s, shares 16 channels); 2 x DA (12-bit)
- Debugging/Programming: Supports JTAG/SWD interfaces, supports IAP
- AMS1117-3.3V Voltage Regulator
- MIC2075-2: Onboard USB power management device
- Power Supply Switch: Powered from 5Vin or USB connection
- Boot Mode Selection: For configuring BOOT0 pin
- Power Indicator
- VBUS LED
- Reset Button
- 8M Crystal
- 32.768K Crystal: For internal RTC with calibration
- JTAG/SWD Interface: For debugging/programming
- USB Connector: For establishing USB communication between PC and the STM32 development board
- MCU Pins Expander: VCC, GND, and all I/O pins accessible on expansion connectors
- 5Vin Pinheader: 5V power supply required when using USB HOST/OTG
- USB Jumper: Short the jumper when using USB, open to disconnect from related I/O port
- VBAT Selection Jumper: Short to use system power supply, open to connect VBAT to external power, such as a battery
Unconditional Satisfaction Guarantee
