Description
- Waveshare 5.83″ E-Ink Display HAT for Raspberry Pi, 648480, Red/Black/White 3-Color
- Harnesses ultra-low power, refreshing only consumes 26.4mW
- Supports Raspberry Pi, Jetson Nano, Arduino, and STM32
- Features a vivid 648480 tri-color e-ink display
- Ensures clear, paper-like viewing without backlight
- Employs SPI interface for easy connectivity
The Waveshare 5.83″ E-Ink Display HAT for Raspberry Pi, 648480, Red/Black/White 3-Color is an advanced e-paper display designed for integration with Raspberry Pi and Jetson Nano boards. This display offers a resolution of 648480 pixels and supports three colors: red, black, and white. It is characterized by its low power consumption and wide viewing angle of over 170 degrees, making it suitable for applications such as price tags, shelf labels, and industrial instruments.
This e-paper display utilizes a passively reflective panel that requires ambient light, eliminating the need for a backlight. It maintains the last displayed content even when powered down, which contributes to its ultra-low power usage, as power is only necessary during refresh cycles. The display is equipped with a standard Raspberry Pi 40PIN GPIO extension header, ensuring compatibility with various controller boards, including Raspberry Pi, Jetson Nano, Arduino, and STM32.
The device operates on a 3.3V/5V power supply and supports both 3-wire and 4-wire SPI communication interfaces. It includes an onboard voltage translator, making it compatible with 3.3V and 5V microcontroller units. The display’s microcapsule electrophoretic technology ensures clear visibility under natural or lamplight, providing a paper-like reading experience. This makes it an ideal choice for e-reader applications and other scenarios where a paper-like display is desired.
View moreWhat’s Included
- 1x Waveshare 5.83″ E-Ink Display HAT for Raspberry Pi, 648480, Red/Black/White 3-Color
- 1x 5.83inch e-Paper (B)
- 1x e-Paper driver HAT
- 1x RPi screws pack (2pcs)
- 1x GH1.25 9pin cable ~20cm
Dimensions
- Outline Dimensions: 125.40 x 99.50 mm
- Display Size: 119.232 x 88.320 mm
Links
Website
648480, 5.83inch E-Ink display HAT for Raspberry Pi, red/black/white three-color – Product Wiki
Specifications
- Resolution: 648480 pixels
- Viewing Angle: Greater than 170
- Display Colors: Red, Black, White
- Grey Scale: 2 levels
- Communication: SPI
- Display Panel: E-paper
- Experience: Paper-like
- Environment: Requires ambient light
- Display Type: Passively reflective
- No backlight; retains last content display without power
- Ultra-low power consumption; power needed only for refreshing
- Standard Raspberry Pi 40-pin GPIO extension header; supports Raspberry Pi series boards and Jetson Nano
- SPI interface for connecting with controller boards like Raspberry Pi, Jetson Nano, Arduino, STM32, etc
- Onboard voltage translator; compatible with 3.3V / 5V MCUs
- Includes online development resources and manual (examples for Raspberry Pi, Jetson Nano, Arduino, STM32)
- Operating Voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Full Refresh Time: 20 seconds
- Refresh Power: 26.4 mW (typical)
- Dot Pitch: 0.184 0.184 mm
- Standby Current: Less than 0.01 A (almost none)
Unconditional Satisfaction Guarantee
