Description
- Waveshare 2.7″ E-Ink Display HAT 264×176 for Raspberry Pi
- Offers paper-like display with 264×176 resolution
- Features ultra-low power consumption
- Includes onboard keys for extended applications
- Supports Raspberry Pi, Jetson Nano via SPI
- Ensures long-lasting display without backlight
The Waveshare 2.7″ E-Ink Display HAT 264×176 for Raspberry Pi offers a paper-like display experience with a resolution of 264×176 pixels. It features a wide viewing angle of over 170 degrees and displays in black and white. This e-paper display is ideal for applications such as price tags, shelf labels, and industrial instruments, requiring ambient light for visibility.
The display operates with ultra-low power consumption, needing power only for refreshing. It includes onboard keys for extended applications and is compatible with Raspberry Pi series boards, Jetson Nano, and other controller boards via SPI interface.
View moreWhat’s Included
- 1x Waveshare 2.7″ E-Ink Display HAT 264×176 for Raspberry Pi
- 1x 2.7inch e-Paper HAT
- 2x RPi screws pack (2pcs)
- 1x PH2.0 20cm 8pin
Dimensions
Links
Website
264×176, 2.7inch E-Ink display HAT for Raspberry Pi – E-Paper Hat Wiki
Specifications
- Resolution: 264176 pixels
- Viewing angle: greater than 170
- Display color: black and white
- Grey scale: 4 levels
- Communication: SPI
- Display panel: e-paper
- Experience: paper-like
- Environment: ambient light required
- Display type: passively reflective
- No backlight; retains last content display when powered down
- Ultra-low power consumption; power needed only for refreshing
- Onboard 4 keys for extended applications
- Standard Raspberry Pi 40-pin GPIO extension header; supports Raspberry Pi series boards and Jetson Nano
- SPI interface for connecting with controller boards like Raspberry Pi, Arduino, and STM32
- Onboard voltage translator; compatible with 3.3V/5V MCUs
- Includes development resources and manual (examples for Raspberry Pi, Jetson Nano, Arduino, STM32)
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Full refresh time: 6 seconds
- Partial refresh time: 0.3 seconds
- Refresh power: 24mW (typical)
- Standby current: less than 0.01uA (almost none)
- Dot pitch: 0.217 0.217 mm
Unconditional Satisfaction Guarantee
