Description
- ServoCity Stingray-9 Servo Gearbox (6.7 rpm, 3150 Oz-in Torque, Continuous Rotation)
- Enhances torque with 9:1 gear ratio
- Supports versatile mounting options
- Operates in feedback or continuous modes
- Engineered for R/C or Arduino compatibility
- Stall torque up to 3150 oz-in
The ServoCity Stingray-9 Servo Gearbox (6.7 rpm, 3150 Oz-in Torque, Continuous Rotation) is engineered to enhance torque and precision through a 9:1 external gear ratio, driven by the goBILDA5-Turn Torque Servo. This gearbox is designed to isolate the load to a steel hub shaft supported by ball bearings, thereby safeguarding the servo from axial loads. It offers versatile mounting options with M4 threaded holes compatible with the goBILDAsystem, and the hub provides additional fastening possibilities.
The 8mm REX bore of the hub shaft can accommodate an 8mm REX shaft or serve as a wire pass-through. The gearbox functions similarly to a standard servo but with increased range and torque, maintaining compatibility with R/C receivers, Arduino, Raspberry Pi, or REV controllers. It is FTC-legal as the servo remains unmodified. Available in both feedback and continuous modes, the gearbox allows for mode toggling using a servo programmer. The feedback mode controls position, while the continuous mode manages speed and direction.
View moreWhat’s Included
- 1x ServoCity Stingray-9 Servo Gearbox (6.7 rpm, 3150 Oz-in Torque, Continuous Rotation)
Dimensions
Specifications
- Gear ratio: 9:1
- Voltage range: 4.8V – 8.4V
- No-load speed at 4.8V: 2.25 sec/60 (4 RPM)
- No-load speed at 6.0V: 1.80 sec/60 (5 RPM)
- No-load speed at 7.4V: 1.53 sec/60 (6 RPM)
- Stall torque at 4.8V: 2160 oz-in (154.8 kg.cm)
- Stall torque at 6.0V: 2700 oz-in (194.4 kg.cm)
- Stall torque at 7.4V: 3150 oz-in (226.8 kg.cm)
- No-load current at 4.8V: 150mA
- No-load current at 6V: 160mA
- No-load current at 7.4V: 200mA
- Stall current at 4.8V: 2000mA
- Stall current at 6V: 2500mA
- Stall current at 7.4V: 3000mA
- Motor type: Brushed DC
- Direction with increasing PWM signal: Counterclockwise
- Maximum PWM range: 500-2500sec
- Maximum PWM range (continuous): 900-2100sec
- Travel per sec: 0.10/sec
- Maximum rotation: 200 (0.55 turns)
- Pulse amplitude: 3-5V
- Deadband width: 4sec
- Wire length: 300mm
- Wire gauge: 22AWG
- Connector type: 3-Pos TJC8 Servo Connector [MH-FC]
Unconditional Satisfaction Guarantee
