Description
- ServoCity Stingray-9 Servo Gearbox (1.53 Sec/60, 3150 Oz-in Torque, 200 Rotation)
- Enhances torque with a 9:1 gear ratio
- Supports servo isolation with hub-shaft
- Offers dual-mode capability
- Ensures compatibility with various controllers
- Provides 3150 oz-in stall torque
The ServoCity Stingray-9 Servo Gearbox (1.53 Sec/60, 3150 Oz-in Torque, 200 Rotation) is engineered to enhance torque and precision through a 9:1 external gear ratio, driven by the goBILDA5-Turn Torque Servo. This gearbox is designed to isolate the load to a steel hub shaft supported by ball bearings, thereby safeguarding the servo from axial loads. It offers versatile mounting options with M4 threaded holes compatible with the goBILDAsystem, and the hub shaft’s 8mm REX bore can accommodate an 8mm REX shaft or serve as a wire pass-through.
The gearbox functions similarly to a standard servo but with increased range and torque, maintaining identical control signals. It is compatible with R/C receivers, Arduino, Raspberry Pi, or REV controllers, and remains FTC legal as the servo is unmodified. The gearbox is available in feedback mode, where the signal controls position, and continuous mode, where the signal controls speed and direction. These modes can be toggled using a 3102-0001 servo programmer, thanks to the dual-mode capability of the goBILDA5-Turn Torque Servo. Note: Ensure proper handling to avoid damage from axial loads.
View moreWhat’s Included
- 1x ServoCity Stingray-9 Servo Gearbox (1.53 Sec/60, 3150 Oz-in Torque, 200 Rotation)
Specifications
- Gear ratio: 9:1
- Voltage range: 4.8V – 8.4V
- No-load speed at 7.4V: 1.53 sec/60 (6 RPM)
- Stall torque at 7.4V: 3150 oz-in (226.8 kg.cm)
- No-load current at 7.4V: 200mA
- Stall current at 7.4V: 3000mA
- Motor type: Brushed DC
- Direction with increasing PWM signal: Counterclockwise
- Maximum PWM range: 500-2500sec
- Maximum PWM range (continuous): 900-2100sec
- Travel per sec: 0.10/sec
- Maximum rotation: 200 (0.55 turns)
- Pulse amplitude: 3-5V
- Deadband width: 4sec
- Wire length: 300mm
- Wire gauge: 22AWG
- Connector type: 3-Position TJC8 Servo Connector [MH-FC]
Unconditional Satisfaction Guarantee
