Lynxmotion SES-V2 Robotic Arm (4 DoF) w/ Smart Servos Kit
Designed for STEM education and hobby robotics
Modular design with aluminum, carbon fiber and G10 parts
Uses Lynxmotion Smart Servo (LSS) motors
Lynxmotion (LSS) – LSS FlowArm App (download)
Support for Robot Operating System 2 (ROS2)
Assembly required, assembled version available HERE
TheLynxmotion SES-V2 Robotic Arm (4 DoF) w/ Smart Servos Kit is Lynxmotions 6th generation articulated robotic arm. This unassembled version is intended as a hobby / scale version of an industrial robotic arm and is designed around the fully configurable Lynxmotion Smart Servo motors and Lynxmotion Servo Erector Set (SES v2) modular construction system.
Given that the structure of the arm is comprised of modular brackets and servos, purpose-built and ultralight aesthetic plastic shells give a futuristic look to the arm without impeding any motion. The shells are held in place using neodymium magnets, and vinyl stickers allow for personnalisation.
LSS Articulated Arm
This versatile setup facilitates customization and expansion for applications through the use of additional brackets, electronics, sensors and more, and adding additional degrees of freedom or changing the gripper is straightforward.
LSS Articulated Arm with and without shells
Although well suited for use on a desk for development and experimentation, the arm can be easily fitted on a mobile robot and powered using a 3S (11.1V) LiPo battery (sold separately) with XT60 connector. The included LSS Adapter electronics board makes connecting to an Arduino shield compatible board, Raspberry Pi, XBee or other serial device easy.
LSS Articulated Arm on a Lyxmotion mobile platform
CAD design files, as well as examples using Arduino and Python are available so that students and hobbyists can integrate the arm into their projects. The graphical user interface, LSS FlowArm (created using FlowBotics Studio) makes recording and playing back sequences effortless.
LSS FlowArm graphical user interface
The Lynxmotion Smart Servo motors were designed and optimized for articulated robotic joints and ease of use. The custom LSS communication protocol is human readable, uses full duplex (dedicated Tx and Rx lines) and selectable baud rates. Optimize the motion by changing the properties of each servo; anything from setting a maximum speed or angular range to the angular acceleration, holding stiffness and more. Each servo can be queried for a wide variety of real-time values or configured settings, including sensor feedback from the absolute encoder (position, speed and more), current, voltage and temperature.
LSS-ROS2-Arms is an entirely open-source ROS package that allows to control a physical or simulated SES V2 Arm (4DoF or 5DoF version).
SES-V2Robotic Arm ROS2 Example
Features
5 x fully configurable modular smart servo motors
Modular aluminum brackets, carbon fiber tubing and more
V-style gripper opens from 0 to 180 degrees
Compatible with Lynxmotion Servo Erector Set electronics
Create sequences using handheld teach mode, coordinates, virtual arm
Built-in safety features (over current, temperature, voltage)
Easy to understand and human readable LSS communication protocol
View moreWhat’s Included
3 x LSS ST1 actuators
2 x LSS HT1 actuator
LSS Adapter (electronics interface)
12 V Wall adapter with on/off switch
USB cable
All necessary brackets, frame components and hardware
Screwdriver (Phillips PH1, PH2)
Aesthetic plastic shells with vinyl stickers
Dimensions
Size
Reach:5.819″ / 401.80mm
Rotation: 360 /Limited by the cable
Links
Website
Lynxmotion SES-V2 Robotic Arm (4 DoF) Information & Guide
Unconditional Satisfaction Guarantee
