Description
- LIGPOWER MN4110 KV340 High-Efficient UAV Motor w/ 3.8kg Max Thrust
- Enhances endurance with advanced cooling, increasing heat flux by 18%
- Delivers 3.8kg max thrust with rapid response and efficiency
- Operates reliably in demanding conditions, waterproof and dustproof
- Features industrial-grade construction, resisting temperatures up to 220C
- Optimizes performance with 5% more efficiency on loads between 1kg and 2.5kg
The LIGPOWER MN4110 KV340 High-Efficient UAV Motor w/ 3.8kg Max Thrust is a sophisticated component designed for high-performance multicopters, VTOL, and fixed-wing drones. This motor is part of the MN Navigator series and is engineered to enhance flight endurance through its advanced cooling design, which increases heat flux by 18%. Its 12N14P configuration and high winding coefficient ensure a rapid response and efficient flight, achieving up to 8g/W at 60% throttle.
The motor is built to withstand demanding conditions, featuring industrial-grade construction that is waterproof, dustproof, and resistant to high temperatures up to 220C. It offers a maximum thrust of 3.8kg and is designed to operate efficiently, providing 5% more efficiency on loads between 1kg and 2.5kg, and 5% more thrust at full throttle. The bendable cable design minimizes the risk of disconnection, enhancing reliability and durability.
Note: Ensure proper handling and installation to maintain safety and performance standards.
View moreWhat’s Included
- 1x LIGPOWER MN4110 KV340 High-Efficient UAV Motor w/ 3.8kg Max Thrust
- 1x Hardware pack
Dimensions
- Motor Size: 47.4 x 36.7 mm
Links
PDF File
- LIGPOWER MN4110 KV340 High-Efficient UAV Motor w/ 3.8kg Max Thrust – Datasheet
Specifications
- Maximum thrust: 3.8 kg
- Mean Time Between Failures (MTBF): Approximately 1000 hours
- Features: Industrial grade, waterproof, dustproof, low noise, 220C high temperature resistance
- 5% more efficient on 1 kg-2.5 kg
- 5% more thrust at 100% throttle
- Heat flux increases by 18%
- Configuration: 12N14P
- Shaft diameter: IN 6 mm, OUT 4 mm
- Bearing: 686ZZ/696ZZ
- Magnet level: N45SH
- Lead cable: 16AWG*150 mm
- Copper wire: 220C high temperature resistance, Level C
- Coil insulation test: 500V/5s
- Centrifugal cooling design: Yes
- Rotor dynamic balance standard: 5Mg
- Rated voltage (Lipo): 6S
- Idle current (10V): 0.9A
- Propeller recommendation: P17-18″/T16x8″
- Peak current (180s): 30A
- Motor weight (including cable): 152g
- Maximum power (180s): 700W
- Package weight: 255g
- Internal resistance: 112m
Unconditional Satisfaction Guarantee
