Description
- Single shaft serial bus intelligent servo
- 20 kg strong torque with metal gear
- Equipped with position/temperature/voltage feedback
- User-friendly connector
This three connectors serial bus smart servo possess 20KG torque and adopts all-metal gears inside, strong and durable. It can be controlled by serial port commands, connected multiple servos at the same time, which can help us create robotic arms and bionic robots. Compared with ordinary servos on the market, it can reading back the angle and faceback voltage, temperature position parameter.
1. Features
1) Equipped with position/temperature/voltage feedback, protect the servo from burning
2) With the TTL/USB debugging board, you can set the servo through the provided PC software
3) High-precision potentiometer for more stable operation
4) Provide bus servo communication protocol, 51, Arduino and STM32 source code
2. Clean Wiring
There are 3 ports for you to connect which makes the project have clean wiring and beautiful outlook.
3. Servo Debugging System
In Debugging system, you can set ID number, working mode, rotation speed, position deviation, LED light, temperature alarm and voltage alarm for servos.
View moreWhat’s Included
1* HTS-20L servo
1* 20cm servo wire
4* plastic servo horn
1* screw bag
Dimensions54.38*20.04*45.5mmSpecifications
Weight: 62g (2.18OZ)
Size: 54.38*20.04*45.5mm
Working voltage: 6-8.4V
Speed: 0.2sec/607.4V
Torque: 20kg.cm 7.4V
Rotation: 0-240
No-load current: 100mA
Stalled current: 2.4-3A
Servo accuracy: 0.3
Control method: UART serial command
Communication baud rate: 115200
Servo ID: 0-253 are available
Data feedback: temperature, voltage, position
Protection: avoid stalling and overheat
Working mode: servo mode and deceleration motor mode
Connector: PH2.0-3P
Unconditional Satisfaction Guarantee
