Edison Robot V3 – EdPack30 (30x)

Description

• Edison Robot V3 – EdPack30 for Schools & Clubs (30 Units)
• Ideal for schools, libraries, and clubs
• Includes 30 rechargeable robots
• Easy programming with USB
• Ready-to-use with wheels and skids
• Designed for supervised educational use

The Edison Robot V3 – EdPack30 (30x) is an ideal solution for educational settings such as schools, libraries, and clubs. This comprehensive pack includes thirty Edison V3 robots, each equipped with an internal rechargeable battery. The robots are designed to facilitate programming and charging via an attached USB cable.

Each Edison V3 robot is accompanied by a set of skids and wheels, with the skids being one attached and two additional spares provided within the packaging. The wheels come already attached to the robot, along with tires, ensuring that the robot is ready for use right out of the box.

Please note that the Edison V3 robot is intended for use under supervision if necessary, and it is important to follow all operational guidelines to ensure safe and proper usage.

View moreWhat’s Included

• 30x Edison robot with internal rechargeable battery
• 3x Skid(1x attached to the robot, 2x spare skids located in the packaging)
• 2x Wheel(attached)
• 2x Tire(attached)

Dimensions

• 16.3 x 22.5 x 9.3 cm

Links

Websites

• Edison Robot – Lessons
• Edison Robot – Activities
• Edison Robot – Programming

Multimedia

docReady(function() {$(‘button[aria-controls=unique-tab-5]’).one(‘click’,function() {$(“#iframe-video-1”).html(‘‘);})});Specifications

• Weight: 1850 g

• Sensors and inputs

• Obstacle detection: Two infrared (IR) LEDs (front left and right) and IR receiver module (doubles as the IR data comms and remote-control receiver)
• Remote control: IR receiver module (which operates at 38kHz) allows Edison V3 to learn IR codes from the EdRemote remote control and most standard TV remote controls
• Infrared data comms: IR receiver module (doubles as obstacle detection sensor and IR remote receiver)
• Line tracker: Red LED and phototransistor (doubles as a barcode reader and iPad programming port)
• Light sensors: Two phototransistors (front left and right)
• Sound sensor: Piezo transducer (doubles as speaker and clap sensor)
• Keypad: Three-button keypad
  • Triangle press for on, press to start program, user programmable
  • Square press to stop a program, hold down for off (not user programable)
  • Round press three times to read barcode, user programmable

• Outputs

• Drive: Differential two-wheel drive system with wheel encoders powered by the right and left 3-volt motors. Wheel encoder resolution is 1.25mm (0.05in) of wheel travel.
• Infrared data comms: Two IR LEDs (doubles as obstacle detection sensor)
• Sound: Piezo transducer (doubles as speaker and clap sensor)
• Lights: Two red LEDs (front left and right)

• Processor

• GigaDevice GD32F350CBT6 Arm Cortex-M4 32-bit MCU

• Recharging

• The internal battery can be fully recharged from flat in 4 to 5 hours. There are two methods for recharging the battery:
• USB: The internal battery can be recharged via the USB cable. Charge current is 180mA.
• EdCharger: The internal battery can be recharged using the EdCharger desktop charger. Charge current is 180mA.