50% OFF! Hot items selling fast—Grab them before they're gone!
Our loudest, lowest, most impactful
subwoofer yet
Unique 3XR Architecture
Groundbreaking phase, volume, frequency,
EQ, and control features.
The DN15s unique 3XR Architecture provides triple the bass-producing surface area of a traditional 15 ported subwoofer. This extra surface area moves more air, resulting in monumental low end. And because 3XR doesnt use ports, it also provides crystal-clear sound with no port noise distortion.
The DN15s 3XR Architecture provides triple the bass-producing radiating surface area of a traditional 15 ported subwoofer. This extra surface area moves more air, enabling the DN15 to play as loud and low as a two similarly-sized 18 ported subwoofers. And because 3XR doesnt use ports, DN15 also provides massive, crystal-clear bass with no port noise distortion.
Learn how it works
As the core technology behind Descends 3XR Architecure, its passive bass radiators enable the DN15 to play as loud and low as two 18 ported subwoofers without unwanted port noise distortion. Passive radiators also deliver a smooth frequency response like a sealed sub, but with the port-like ability to play louder and lower in a smaller enclosure.
What you get is the best of both worlds: louder, clearer bass than a ported sub from a smaller enclosure than a sealed sub.
Powered by Class H digital amplification, and with an advanced 56-bit DSP that includes three custom EQ modes, DN15 plays exceptionally impactful bass down to 20Hz.
The DN15s advanced 1500W peak Class H digital amplifier delivers continuous power to cleanly reproduce sustained bass below 20Hz. With real-time monitoring and adjustments to the sliding rail voltage, the DN15 delivers considerably higher power during short, transient peaks such as bass drum kicks and on-screen artillery blasts.
The advanced 56-bit Digital Signal Processor (DSP) extends and improves the DN15s bass response. The DSP tightly monitors and controls the woofer system to prevent distortion and woofer damage at ultra-high volumes with a minimum of audible artifacts.
With three built-in performance EQs modes, the DN15 can be optimized to your room and listening preferences, and adjusted to match whatever youre listening to.
The DN15s default setting out of the box, Flat Mode provides the most balanced performance, as determined by our acoustic experts, providing the perfect harmony between low end extension and full spectrum maximum output.
With breakthrough technologies such as Intelligent Phase Control, easy settings management with its dedicated remote control, and advanced custom integration capabilities, the DN15 is easily optimized to the specifics of your system.
Intelligent Phase Control provides a full 360 degrees of customizable phase adjustment, always centered around the settings of the low-pass filter. This provides the ability to tune the subwoofer for minimal group delay between speakers and a flawless blending experience between your speakers and the subwoofer.
Learn how it works
Easily adjust the DN15s volume level, phase, and EQ with its slim remote control. Theres no need to constantly get up to manually change settings or wonder if youve gotten them right.
While a single subwoofer can add bass and
enhanced realism to any system, it may not provide
consistent frequency response throughout the room.
When two or more subwoofers are properly
employed throughout the room, sound waves
disperse more evenly, flattening the frequency
response. The result is smoother bass throughout
the room, helping to eliminate boomy locations or
dead spots.
With both 12V input and IR pass-through, you have the ability to pair the DN15 with most control systems and place the subwoofer wherever you want in the room and still experience full functionality.
| Colors | Midnight Black |
| Transducers | 15 Long-Throw woofer |
| Passive Radiators | Dual 15 XBR Configuration |
| Bass Type | Bass Radiator |
| Feet | Permanently Installed Feet with Rubber Pad (no leveling) |
| Dimensions | 24.14″ x 23.44″ x 24.91″ 612.6 x 594.4 x 632.7mm |
| Amplifier Type | Class H Digital |
| Peak Power | 1500W |
| Continuous (RMS) | 500W |
| Frequency Response (-/+ 3dB) | 20 Hz 150 Hz |
| Low-Pass Crossover Freq | 40 Hz 120 Hz |
| Phase Adjustment | 0 to 180 degrees (by 45 degree increments) |
| Power Supply | Internal IEC 3 prong Jack 120V/240V switch |
| Europe (<.5W Compliance) | Yes |
| LFE | Single RCA |
| Speaker | Left/Right 5-Way binding posts |
| Main Power | On/Off |
| Volume Control | +/-/ Mute Buttons |
| Low Pass Control | +/- Buttons |
| Phase Control | Toggle Button |
| Status RGB LED | Yes |