Description
- AndyMark Flyer Overdrive Gearbox, Falcon 500 Input, No Gears Included
- Innovates gearbox technology for FRC
- Allows output shaft customization
- Mounts easily onto 1 inch wide extrusion
- Supports various input options
- Enables flexible gear ratio configuration
The AndyMark Flyer Overdrive Gearbox, Falcon 500 Input, No Gears Included represents a cutting-edge advancement in gearbox technology for FRC applications. This innovative gearbox is designed to function both as an overdrive and underdrive system, allowing the output shaft to spin faster or slower than the input shaft, respectively. This dual functionality is achieved through the use of gears with a 1/2 inch hex bore, providing users with the flexibility to configure the gearbox according to their specific needs.
The gearbox features a short 1/2 inch hex output shaft that extends approximately 2 inches from either face, with the option to replace it with any Toughbox Output Shaft. The design accommodates easy customization, as both the front and rear bearings have a 1.125 inch outer diameter, enabling the replacement of the rear bearing with another 1/2 inch hex bearing. This allows for the use of a pass-through shaft of any desired length without the need for machining, making it ideal for applications such as roller intakes.
The gearbox’s “wings” are engineered to fit over any 1 inch wide extrusion, such as Peanut or Box Tube, facilitating straightforward mounting to a robot’s frame. While the gearbox is compatible with various input options, including CIM/NEO, Falcon, and Sport Gearbox, this particular model is designed for use with the Falcon 500 input. Users have the option to supply their own gears, as the gearbox does not include any gears, allowing for further customization of gear ratios.
View moreWhat’s Included
- 1x AndyMark Flyer Overdrive Gearbox, Falcon 500 Input, No Gears Included
Links
ZIP File
- AndyMark Flyer Overdrive Gearbox, Falcon 500 Input, No Gears Included – CIM Flyer Gearbox STEP
Specifications
- Diametral pitch: 20
- Gear spacing: 70 teeth
- Gear width: 0.500 inches
- Motor input: CIM/NEO, Falcon, 1/2 inch hex
- Motor quantity: 1
- Output shaft: 0.500 inch hex, 2 inches long
- Plate material: 5052 aluminum
- Pressure angle: 20 degrees
- Ratio options: 1:2.88, 1:2.5, 1.92, 1.33, 1.33:1.92:1, 2.5:1, 2.88:1
- Weight range: 1.04 – 1.56 pounds
Unconditional Satisfaction Guarantee
