Air passage and proximity sensor kit for Snapmaker 2.0 3D Printing Module

Product Overview
The Blower vent and Print cooling vent are both used for air inlets and outlets. The Proximity sensor is used for bed calibration.
Compatibility: Snapmaker 2.0 3D Printing Module (Note: This kit is only compatible with the upgraded Snapmaker 2.0 3D Printing Module. See the picture below for a reference.)
The proximity sensor in this kit is compatible with the Snapmaker 2.0 Dual Extruder.

{ “__shgImageV2Elements”: { “uuid”: “s-65d90fb3-6930-492e-81f1-688545697c42” } }

• 
  
  • In the box
  • Blower vent 1
    Print cooling vent 1
    Proximity sensor 1

Installation
Replacement guide on Snapmaker Wiki.