Actuonix L12 Linear Actuator 30mm 100:1 6V Limit Switch

Description

• Peak Power Point: 31N @ 7mm/s
• Gear Ratio: 100:1
• Max Speed (no load): 13mm/s
• Input Voltage: 6V
• Stall Current: 460mA
• Stroke: 30mm

The L12 Linear Actuator 30mm 100:1 6V Limit Switch is standard line of Micro Linear Actuator. The L12-S comes with end-limit switches that will turn off power to the motor when the device reaches 1mm of the end of stroke. Internal diodes allow the actuator to reverse away from the limit switch. The limit switches are set at the factory and are not adjustable. If you need a custom stroke length actuator please see this article.

Apply voltage to the device and it will extend, reverse the polarity and it will retract. This can be accomplished manually with a DPDT (Double-Pole Double-Throw) switch, wirelessly using our wireless linear actuator controller or using an H Bridge circuit. The “S” series actuators cannot be used with the LAC control board.

View moreLinks

PDF Files

• L12 Linear Actuator 30mm 100:1 6V Limit Switch Datasheet
• L12 Linear Actuator 30mm 100:1 6V Limit Switch Schematic

MultimediadocReady(function() {$(‘button[aria-controls=unique-tab-5]’).one(‘click’,function() {$(“#iframe-video-1”).html(‘‘);})});Specifications

Gearing Option :100:1

• Peak Power Point: 31N @ 7mm/s
• Peak Efficiency Point: 17N @ lOmm/s
• Max Speed (no load): 13mm/s
• Max Force (lifted): 42N
• Back Drive Force (static): 22N

Stroke Option:30mm

• Mass: 4g
• Repeatability (-l,-R,-P&LAC): 0.2 mm
• Max Side Load (extended): 40N
• Closed Length (bole to hole): 82mm
• Potentiometer (-1, -R, -p): 3kQ50%

Voltage Option:6VDC

• Max Input Voltage: 7.5V
• Stall Current: 460mA
• Standby Current(-I/-R): 7.2mA
• Operating Temperature: -10Cto+50C
• Potentiometer Linearity: Less than 2.00%
• Max Duty Cycle: 20 %
• Audible Noise: 55dB @ 45cm
• Ingress Protection: IP-54
• Mechanical Backlash: 0.2mm
• Limit Switches (-S): Max. Current Leakage: 8uA
• Maximum Static Force: 200N