Mightyzap Micro/Mini Linear Motor Actuator w/ 22mm Stroke, Built in Limit Switches, 12n/10mm/S, 7.4V

Description

• Compact size and stroke: 22 mm
• All in one compact design, integrating a circuit, limit switch, DC motor, gearbox, lead screw, rod, etc
• 7.4V cored DC motor applied
• Rated load and speed: 12N and 10mm/s respectively
• Built in limit switches enable simple linear motion control between two points

The Mightyzap Micro/Mini Linear Motor Actuator w/ 22mm Stroke, Built in Limit Switches, 12n/10mm/S, 7.4VCored DC Motor & Gear Box is a simple yet robust linear solution. This compact linear actuator is designed for durability and tolerance, providing an effective linear control solution.

View moreWhat’s Included

1x Rear Hinge / Hinge base / Hinge shaft

3x M3 Nuts

3x M2.5×5 screws

1x Socket set screw

Dimensions

57.4 mm (L)

29.9 mm (W)

15 mm (H) (excluding rod end tip and rear hinge)

Weight: 50 g

LinksAttached files

• drawing.png
• Data Sheet_12L_12D_12D7_ Limit Switch Actuators_ENG_V1.pdf
• standard accessories_en.png

Specifications

Motor: Core DC

Stroke: 22 mm

Input Voltage: 7.4 V

Rated Load: 12 N

Maximum Applicable Load: 24 N (at 20% duty rate)

Speed: 10 mm/sec (at no load)

Maximum Duty Rate: 50%

Gear: Engineering Plastic Gears

Gear Ratio: 10:1

Rod: Engineering Plastic Rod

Mechanical Backlash: 0.03 mm (30 m)

Current Consumption: 140 mA (rated), 30 mA (idle), 0.3 A (stall)

Audible Noise: 50 dB at 1 m

Ingress Protection: IP 54 (dust and watertight)

Operating Temperature: 10 60 degrees C

Wire Harness: 300 mm length, 0.08 60 (22 AWG).