Mightyzap Micro/Mini Linear Motor Actuator, 22mm Stroke, Built in Limit Switches, 100N, 7.7mm/S, 12V

Description

• Compact size with a stroke of 22 mm
• All in one compact design integrating a circuit, limit switch, DC motor, gearbox, lead screw, rod, etc
• Heavy duty coreless DC motor applied
• Rated load and speed of 100N and 7.7mm/s respectively
• Built in limit switches enable simple linear motion control between two points

The Mightyzap Micro/Mini Linear Motor Actuator, 22mm Stroke, Built in Limit Switches, 100N, 7.7mm/S, 12Vseries is a simple and efficient linear solution designed to be compact, durable, and tolerant. It is equipped with a coreless DC motor, a gearbox, a lead screw, and built in limit switches. This series offers a 22mm stroke for simple linear control.

View moreWhat’s Included

1x Rear Hinge / Hinge base / Hinge shaft

3x M3 Nuts

3x M2.5×5 screws

1x Socket set screw

1x M3 spanner

Dimensions

57.4 mm (L)

29.9 mm (W)

15 mm (H) (excluding rod end tip and rear hinge)

Weight: 50 g

LinksAttached files

• Data Sheet_12L_12D_12D7_ Limit Switch Actuators_ENG_V1.pdf
• drawing.png
• standard accessories_en.png

Specifications

Motor: Coreless DC

Stroke: 22mm

Input Voltage: 12V

Rated Load: 100N

Maximum Applicable Load: 200N (at 20% duty rate)

Speed: 7.7mm/sec (at no load)

Maximum Duty Rate: 50%

Gear: 4 Metal and 2 Engineering Plastic Gears

Gear Ratio: 50:1

Rod: Metal Alloy Rod

Mechanical Backlash: 0.03mm (30um)

Current Consumption: 380mA (rated), 20mA (idle), 1.6A (stall maximum), 0.8A (stall default)

Audible Noise: 50db at 1m

Ingress Protection: IP 54 (dust and water tight)

Operating Temperature: 10 to 60 degrees C

Wire Harness: 300mm length, 0.08 60 (22AWG).