Description
- Waveshare NB-IoT HAT for Raspberry Pi (Europe, Asia, Africa, Australia)
- Offers low delay and power consumption
- Supports LWM2M, COAP, MQTT protocols
- Includes SIM card slot and LED indicators
- Operates via serial AT commands
- Compatible with Raspberry Pi and Jetson Nano
The Waveshare NB-IoT HAT for Raspberry Pi (Europe, Asia, Africa, Australia) is a versatile module designed for IoT applications, offering low delay, power, and cost with wide coverage. It supports various communication protocols, including LWM2M, COAP, and MQTT, and is controlled via serial AT commands. This HAT is compatible with Raspberry Pi series boards and Jetson Nano, featuring a standard 40PIN GPIO extension header and an onboard USB interface for power supply or debugging. It includes a SIM card slot for NB-IoT specific cards and LED indicators for monitoring operational status.
View moreWhat’s Included
- 1x Waveshare NB-IoT HAT for Raspberry Pi (Europe, Asia, Africa, Australia)
- 1x SIM7020E NB-IoT HAT
- 1x Antenna
- 1x USB Type A plug to Micro plug cable
- 1x RPi screws pack (2pcs)
Dimensions
Links
Website
NB-IoT HAT for Raspberry Pi, for Europe, Asia, Africa, Australia – NB-IoT HAT Wiki
Specifications
- Standard Raspberry Pi 40-pin GPIO extension header, compatible with Raspberry Pi series boards and Jetson Nano
- Supports communication protocols: LWM2M, COAP, MQTT, TCP, UDP, HTTP, HTTPS
- Onboard USB interface for power supply or debugging
- Breakout UART control pins for connection with host boards like Arduino and STM32
- Onboard voltage translator, 3.3V by default, switchable to 5V via onboard jumper
- SIM card slot supporting NB-IoT specific cards
- Two LED indicators for easy monitoring of working status
- Baud rate: 300bps to 921600bps (115200bps by default)
- Controlled via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
- Includes development resources and manual with examples for Raspberry Pi, Jetson Nano, Arduino, STM32, and Python
- Band: FDD-LTE B1, B3, B5, B8, B20, B28
- Data rate: Uplink 62.5Kbps, Downlink 26.15Kbps
- SMS: Text mode and PDU mode (depends on the NB card)
- Power supply: 5V
- Logic level: 5V/3.3V (3.3V by default)
- Overall current in idle mode: ~18mA
- Single module current (VBAT=3.3V): Idle mode: 5.6mA, Sleep mode: 0.4mA, PSM mode: 5A, eDRX mode: 70A (eDRX=655.36s)
Unconditional Satisfaction Guarantee
