Description
- Waveshare 2.13″ E-Paper HAT (G), 250×122, Red/Yellow/Black/White, SPI Interface
- Offers paper-like display experience
- Requires power only for refreshing
- Displays in Red/Yellow/Black/White
- Compatible with various controller boards
- Features ultra-low power consumption
The Waveshare 2.13″ E-Paper HAT (G), 250×122, Red/Yellow/Black/White, SPI Interface offers a paper-like display experience with a wide viewing angle and low power consumption. It is ideal for applications such as price tags, shelf labels, and industrial instruments. The display operates without a backlight, maintaining the last content even when powered down, and requires power only for refreshing.
This e-paper display is compatible with various controller boards, including Raspberry Pi, Jetson Nano, Arduino, and STM32, through its SPI interface. It includes an onboard voltage translator, making it suitable for 3.3V and 5V microcontrollers.
View moreWhat’s Included
- 1x Waveshare 2.13″ E-Paper HAT (G), 250×122, Red/Yellow/Black/White, SPI Interface
- 1x PH2.0 20cm 8pin
Dimensions
- Outline Dimensions: 65 x 30.2 mm
- Display Size: 48.55 x 23.70 mm
Links
Website
2.13inch E-Paper HAT (G), 250×122, Red/Yellow/Black/White, SPI Interface – Product Wiki
Specifications
- Resolution: 250122 pixels
- Viewing angle: >170
- Display color: Red/Yellow/Black/White
- Grey scale: 2
- Communication: SPI
- Display panel: E-paper
- Experience: Paper-like
- Environment: Ambient light required
- Display type: Passively reflective
- No backlight; retains last content for a long time even when powered down
- Ultra-low power consumption; power required only for refreshing
- SPI interface for connecting with controller boards like Raspberry Pi, Jetson Nano, Arduino, STM32
- Onboard voltage translator compatible with 3.3V/5V MCUs
- Includes online development resources and manual with examples for Raspberry Pi, Jetson Nano, Arduino, STM32
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Full refresh time: 25 seconds
- Refresh power: 26.4mW (typical)
- Standby current: <0.01uA (almost none)
- E-paper display uses microcapsule electrophoretic technology
- Displays images/texts clearly under lamplight or natural light
- Features nearly 180 viewing angle
- Standard Raspberry Pi 40-pin GPIO header
- Compatible with Raspberry Pi series boards, Jetson Nano
- Onboard SPI control interface
- VCC power (3.3V / 5V input)
- GND ground
- DIN SPI MOSI pin
- SCLK SPI SCK pin
- CS SPI chip selection, low active
- DC data/command selection (high for data, low for command)
- RST external reset, low active
- BUSY status output pin
- Onboard voltage translator
- Compatible with 3.3V / 5V MCUs
- Application examples: Suitable for price tags, asset/equipment tags, shelf labels, conference name tags
Unconditional Satisfaction Guarantee
