Description
- AndyMark EVO Shifter Short Hex Shaft, StageA 3 – 32.74:1 Ratio 2:1, StageB 3 – 45.33:1 Ratio 2:1
- Features two-speed, shift-on-the-fly gearbox
- Employs improved 4-tooth dog shifting method
- Allows motor input with two CIM or NEO motors
- Offers independent high and low ratio selection
- Includes optional third stage for added versatility
The AndyMark EVO Shifter Short Hex Shaft, StageA 3 – 32.74:1 Ratio 2:1, StageB 3 – 45.33:1 Ratio 2:1 represents a significant advancement in shifting transmission gearboxes. This two-speed, shift-on-the-fly gearbox is designed with an improved 4-tooth dog shifting method, allowing for smooth and efficient operation. It accommodates two CIM or NEO motors and can be configured with either two or three interior stages, offering flexibility in performance. The gearbox is shipped assembled, though motors are not installed.
Significant improvements have been made over previous models, including a robust 1/8″ diameter shoulder screw and a dog gear made from AMPCO 18 Bronze, which provides added lubricity. The shift block assembly is enhanced with a larger bearing and threaded steel housing, contributing to its durability. The input stage utilizes 32 DP gears and a 15-tooth pinion gear, enabling a high first stage reduction of 85:15. Users can independently select high and low ratios, and the gearbox supports various encoder options, including the US Digital E4T.
The EVO Shifter employs a pneumatic shift method, powered by a spring-extend pneumatic cylinder, allowing for seamless shifting even during acceleration or deceleration. The gearbox features aggressive weight reduction, with machined gears and plates, and is compatible with an AM14U family chassis or a 2″x1″ box tube frame. The optional third stage provides additional ratio choices, enhancing its versatility.
Note: Ensure proper greasing and break-in procedures are followed for optimal performance and longevity.
View moreWhat’s Included
- 1x AndyMark EVO Shifter Short Hex Shaft, StageA 3 – 32.74:1 Ratio 2:1, StageB 3 – 45.33:1 Ratio 2:1
- Shielded, flanged ball bearings
- 1117 steel 32 DP gears, with 20-degree pressure angle (1st stage)
- 4140 steel 20 DP gears, with 14.5-degree pressure angle (2nd and 3rd stage)
- 1/4″ thick aluminum side plates, pocketed
- US Digital encoder and pneumatic cylinder included
- 4140 steel output shafts
- 1x Red Tacky Grease, 14.2 gram (am-2768)
- Various spacers, bearings, and hardware for assembly
Specifications
- Two-speed, shift-on-the-fly gearbox
- Enhanced 4-tooth dog shifting method
- Compatible with two CIM or NEO motors
- Configurable with two or three internal stages
- Selection of various 1/2 inch output shafts
- Plates designed for mounting two motors
- Shipped assembled, without motors installed
- Dog gear with four dogs on each face for increased strength
- Robust 1/8″ diameter shoulder screw
- Dog gear material: AMPCO 18 Bronze for added lubricity
- Super-strong shift block assembly with larger bearing and threaded steel housing
- Input stage uses 32 DP gears and a 15-tooth pinion gear
- High 85:15 first stage reduction
- Independent high and low ratio selection
- More encoder options available
- Aggressive weight reduction features
- Cluster gears with identical features on both sides for easy assembly
- Optional third stage provides additional C ratio choice of 1.14 or 2:1
- Pneumatic shift method with spring-extend pneumatic cylinder
- Encoder ratio: 3:1 on two-stage versions
Unconditional Satisfaction Guarantee
