Description
- Atlas Scientific 3/4″ Flow m
- Measures total flow and flow rate
- Operates in high flow ranges: 19-114 L/min
- Ensures food and gasoline safety
- Compatible with high pressures: max 200 PSI
- Complies with NSF/ANSI 61 standards
The Atlas Scientific 3/4″ Flow m is engineered to measure both total flow and flow rate within high flow ranges, specifically from 19 liters per minute to 114 liters per minute. This device employs a paddle wheel mechanism, which functions by generating a frequency that is directly proportional to the flow rate, thereby providing accurate measurements of water flow.
View moreWhat’s Included
- 1x Atlas Scientific 3/4″ Flow m
Dimensions
- Cable Length: 69 cm (27.1″)
- Diameter: 4.2 mm
- Length: 100.6 mm (3.9″)
- Width: 65.6 mm (2.5″)
- Height: 74.8 mm (2.9″)
Links
PDF File
- Atlas Scientific 3/4″ Flow m – Datasheet
ZIP File
- Atlas Scientific 3/4″ Flow m – 3D Model
Specifications
- Reads total flow and flow rate
- Range: 19 L/min 114 L/min
- Accuracy: +/- 10%
- Connector: Tinned leads
- Thread: 3/4 Female NPT
- Maximum pressure: 200 PSI
- Temperature range: -29 100 C
- Maximum viscosity: 200 SSU
- Voltage: 4.0V 24 VDC
- Life expectancy: Approximately 10 years
- Current consumption without load: 8mA
- Maximum current consumption: 70mA
- Data output: Square wave
- Food safe
- Gasoline safe
- Diesel safe
- Kerosene safe
- NSF/ANSI 61 compliant
- Materials: PVC, Brass, Viton, Ceramic, Polysulfone, Polypropylene Sulfide (all NSF-61 compliant)
- Operating principle: Paddle wheel flow meter
- Pre-filter requirements: At least 80 microns
- Laminar flow requirement: 20cm of straight pipe before the flow meter
- Output frequency: 0 200+ Hz
- K-factor equation: LPM = 0.5536 x [Hz] + 5.1462
Unconditional Satisfaction Guarantee
