Description
- Compact Size with 17mm diameter DC motor / Stroke: 37 mm
- Rated Load / Speed: 50N / 28mm/s
- Built-in Drive Circuit (RS-485) / MODBUS RTU Protocol
- Position/Curent/Speed Control with Position/Current Feedback (Positional Accuracy : 30m (Uni directional))
- Easy digital I/O control through 4 x Expansion I/O ports (No coding)
The17Lf series mightyZAP servo series with a 17mm diameter motor which improves performance & durability. Provide faster speed under the same rated load specification comparing to the 12Lf series. Overall functionality is almost same as the 12Lf series, but only RS-485 communication and MODBUS RTU protocol are provided, and user expandability has been improved with the expansion I/O ports.
View moreWhat’s Included
“[Standard Accessories]
– 4pin Molex to Molex 200mm wire harness 1pc
– 5 Pin Molex 200mm Expansion I/O cable 1pc
– Rear Hinge / Hinge base / Hinge shaft 1pc
– M3 Nuts 3pcs
– M2.5×6 screws 3pcs
– Socket set screw 1pc
– Socket Head M3.0x8 mounting screw 3pcs
– Rod-end tip(eye bolt) 1pc
“
Dimensions
“- Dimension : 86.8(L)x23(W)x57.9(H)mm
(excluding rod-end tip and rear hinge)
– Weight : 113.5g”
LinksAttached files
- 17Lf Eng (1p).pdf
- Total Manager User Manual_eng.pdf
- 17Lf-xxF-27_eng_V1.pdf
Specifications
“- Microcontroller: 32bit ARM Core. 4096 Resolution A/D converter
– Position Sensor: 10k linear potentiometer
– Motor : Coreless DC
– Stroke: 37mm (Extendable to 40mm)
– Positional Accuracy: 0.03mm (30um) – Unidirectional
– Current Accuracy : 15% at Over 50mA
– Input Voltage: 12V
– Rated Load : 50N
– Max applicable load : 100N (at 20% duty rate)
– Stall force at Current (1.6A / 800mA / 200mA) : 182N / 129N / 50N
– Speed : 28mm/sec (at no load)
– Max Duty rate : 50%
– Gear : Engineering plastic gears
– Gear Ratio : 10:1
– Rod : Metal Alloy Rod
– Mechanical Backlash: 0.03mm (30um)
– Current consumption : 400mA(rated), 30mA(Idle), 1.6A(Stall Max), 0.8A(Stall default)
– Audible noise : 50db at 1m
– Data Communication & Protocol : RS-485 / MODBUS RTU Protocol
– Expansion I/O : 4 Ports (Function : Switch, JOG, Action Enable, Force Off, PAUSE, STOP, RESTART, Alarm OUT)
– LED Indication : 2 Error Indications (Input voltage, Overload)
– Parameter Setting: Programmable (more than 50 Operating and Setting Parameters)
– Ingress Protection: IP-54 (Dust & Water Tight)
– Operating Temp: -10~60C
– Wire harness : Molex to Molex Type (Molex 0510650400, 4pins) / 200mm length, 0.0860(22AWG) / I/O Port Wire harness : Molex 510210500, 5pins / 200mm length, 0.16 x 7 (26AWG)”
Unconditional Satisfaction Guarantee
