iFlight BLITZ F7 Pro Combo Set (E80 Pro 4-IN-1 ESC)w/ CNC Alum Cover

Description

• iFlight BLITZ F7 Pro Combo Set (E80 Pro 4-IN-1 ESC)w/ CNC Alum Cover
• Features DJI HD VTX Connector for plug-and-play
• Includes 512MB BlackBox for data logging
• Supports wide input voltage of 14.8V to 34V
• Designed with a CNC aluminum cover for durability
• Handles continuous current of 80A with burst to 100A

The iFlight BLITZ F7 Pro Combo Set (E80 Pro 4-IN-1 ESC)w/ CNC Alum Cover is a sophisticated flight control system designed for high-performance applications. It features an advanced circuit design with enhanced components to minimize electrical noise and includes a DJI HD VTX Connector for seamless integration without the need for soldering. The flight controller is equipped with indicator LEDs for straightforward visual debugging and a substantial 512MB BlackBox for data logging, complemented by an LC filter for improved signal clarity.

The system supports Smartaudio and IRC Tramp VTX protocols, and is compatible with a wide range of input voltages from 14.8V to 34V, accommodating 4S to 8S LIPO batteries. The motor outputs are facilitated through SH1.25 connectors, and the controller is equipped with a DPS310 barometer, an AT7456E OSD chip, and a BMI270 gyro for precise flight control. The ESC component of the set, the BLITZ E80 4-IN-1, is engineered to handle a continuous current of 80A and a burst current of 100A, with a robust design that includes a PSMN1R0-40YLD MOSFET and a TI automotive-grade synchronous rectifier chip.

The ESC supports a variety of protocols including DShot150, DShot300, DShot600, MultiShot, and OneShot, and is equipped with a current sensor and telemetry support for comprehensive monitoring. The CNC aluminum cover provides additional durability and protection for the components. Note: Ensure proper handling and installation to avoid electrical hazards.

View moreWhat’s Included

• 1x BLITZ F7 Pro Flight Controller
• 1x BLITZ E80 4-IN-1 ESC (Combo1)
• 2x 50V 470UF capacitor
• 1x 50V 470UF capacitor Plate
• 1x Wiring set
• 1x USB Adapter Board

Dimensions

• Flight Controller: 41.5 mm
• ESC: 35 x 42 mm

Specifications

• CNC aluminum cover
• DJI HD VTX connector (plug-and-play, no soldering required)
• Flight controller indicator LEDs for visual debugging
• 512MB BlackBox
• Includes LC filter
• Supports Smartaudio / IRC Tramp VTX protocol
• Firmware target: IFLIGHT_BLITZ_F7_PRO
• Input voltage: 14.8V-34V (4S-8S LIPO)
• Motor outputs: 4x (SH1.25 connector)
• I2C serial: SDA / SLA pads
• Barometer: DPS310
• OSD chip: AT7456E
• LED controller: Yes
• MCU: STM32 F722
• Beeper pad: Yes
• Gyro: BMI270
• UARTS: 4
• ESC input voltage: 2-8S
• Maximum continuous current: 80 A
• Maximum burst current: 100 A
• ESC MCU: G071
• ESC firmware: BLHeli32
• Current sensor: Yes
• Telemetry: Supported
• ESC target: IFLIGHT_BLITZ_G2
• Protocol: Supports DShot DShot150/300/600/MultiShot/OneShot etc