iFlight BLITZ D25 HD F7 AIO (w/o OSD)

Description

• iFlight BLITZ D25 HD F7 AIO (w/o OSD)
• Features STM32F722 MCU for efficient processing
• Includes 32MB onboard flash for data recording
• Supports 2-4S input voltage with LIHV compatibility
• Equipped with WS2812 LED strip and buzzer
• Delivers 20A continuous and 30A peak current

The iFlight BLITZ D25 HD F7 AIO (w/o OSD) is an advanced flight controller designed for high-performance drone applications. It features a powerful STM32F722 microcontroller unit, ensuring efficient processing capabilities for complex flight operations. The integrated ICM42688 gyro provides precise motion sensing, enhancing the stability and responsiveness of the drone. Although it lacks an on-screen display, the device compensates with a 32MB onboard flash blackbox for detailed flight data recording.

This flight controller supports a wide range of input voltages from 2S to 4S, including LIHV batteries, making it versatile for various power configurations. It is equipped with a BEC output of 5V 2.5A, suitable for powering auxiliary devices. The inclusion of a WS2812 LED strip and a buzzer enhances visibility and provides audible alerts during flight operations.

The iFlight BLITZ D25 HD F7 AIO supports Smartaudio and IRC Tramp VTX protocols, facilitating seamless communication with video transmitters. The ESC section is powered by an STM32G071 MCU and features a driver capable of delivering a continuous output current of 20A, with a peak value of 30A for short bursts. The ESC firmware, IFLIGHT_BLITZ_G071_01, supports various DShot protocols, including DShot150, DShot300, and DShot600, ensuring compatibility with a wide range of electronic speed controllers.

The device includes a DPS310 barometer for accurate altitude measurements and a current sensor with a ratio of 200 (1/10mV/A) for precise current monitoring. ESC telemetry is available, routed through PCB and set via UART6, providing real-time data for enhanced flight control. The mounting pattern of 25.5*25.5mm with 3mm holes ensures compatibility with various drone frames.

Note: Ensure proper handling and installation to avoid damage to the electronic components.

View moreWhat’s Included

• 1x Defender 25 BLITZ F7 AIO
• 1x Capacitor 470uF/35V (Onboard)
• 1x XT30U Male 18AWG cable 70mm
• 1x 1.0-7P cable 50mm-28mm
• 1x 1.0-7P cable 50mm
• 4x M2 silicon grommets

Dimensions

• 32.5 x 32.5 mm

Specifications

• Pass-through DJI O3 and Caddx Vista/Polar Connector
• MCU: STM32F722
• Gyro: ICM42688
• OSD: Not available
• Blackbox: 32MB onboard flash
• Gyro: DPS310
• BEC output: 5V 2.5A
• WS2812 LED strip: Included
• Buzzer: Included
• Barometer: DPS310
• Connector: SH1.0 to Type-C adapter
• FC Firmware: IFLIGHT_BLITZ_F722_X1
• Input voltage: 2-4S, supports LIHV battery
• Smartaudio / IRC Tramp VTX protocol supported
• ESC MCU: STM32G071
• Driver: FD6288
• Output current: 20A, peak value 30A (10 seconds)
• ESC firmware: IFLIGHT_BLITZ_G071_01
• Current sensor: Ratio 200 (1/10mV/A)
• ESC telemetry: Yes (PCB routed, set UART6 for telemetry)
• Bidirectional DShot: Yes
• Supports DShot150/300/600/MultiShot/OneShot etc