iFlight BLITZ Whoop F7 AIO V1.12-6S 55A ESC

Description

• iFlight BLITZ Whoop F7 AIO V1.12-6S 55A ESC
• Enhances performance with advanced BGA chipset
• Reduces gyro noise with separated board design
• Supports DJI O3 and Caddx systems
• Precision flight with ICM42688 gyro
• Handles 55A current, peaking at 65A

The iFlight BLITZ Whoop F7 AIO V1.12-6S 55A ESC is an advanced all-in-one flight controller designed to enhance the performance of drone builds. This compact and lightweight unit is engineered with a BGA chipset, offering a significant reduction in size compared to traditional QFP MCUs. It is equipped with ultra-powerful MOSFETs, making it suitable for a wide range of applications.

The flight controller features a separated board design to minimize electrical gyro noise, ensuring optimal performance. It supports pass-through connections for DJI O3 and Caddx Vista/Polar systems, providing flexibility for various setups. The FC PCB can be disassembled from the ESC PCB, allowing for convenient repairs and maintenance.

The iFlight BLITZ Whoop F7 AIO V1.1 is powered by a BGA-STM32F745 MCU running at 216MHz, and includes an ICM42688 gyro for precise flight control. It also features a 16MB onboard flash blackbox for data logging, an AT7456E OSD, and a DPS310 barometer. The unit supports a wide input voltage range of 2-6S, accommodating LIHV batteries, and includes a 5V BEC output.

The ESC component of this product is driven by a BB21 MCU and FD6288 driver, supporting an output current of 55A with a peak value of 65A for short durations. It is compatible with various DShot protocols, including DShot150, DShot300, and DShot600, as well as MultiShot and OneShot. The ESC firmware is Q-H-40 – Bluejay, operating at 24kHz.

Note: Ensure proper handling and installation to avoid electrical hazards and ensure optimal performance.

View moreWhat’s Included

• 1x BLITZ F7 AIO
• 2x Capacitor 470uF/35V
• 1x XT30U Male 18AWG cable 70mm
• 1x 1.0-7P cable 50mm-28mm
• 1x 1.0-7P cable 50mm
• 4x M2 silicon grommets
• 8x M2*12mm screws
• 8x M2 Transparent Nylon Nut
• 10x 0.8mm black Heat shrink tube 10mm

Dimensions

• 35 x 35 mm

Specifications

• Separated flight control board to minimize electrical gyro noise
• Pass-through DJI O3 and Caddx Vista/Polar connector
• Flight control PCB can be disassembled from the ESC PCB for repair
• MCU: BGA-STM32F745, 216MHz
• OSD: AT7456E
• Blackbox: 16MB onboard flash
• Gyro: ICM42688
• BEC output: 5V 2.5A
• WS2812 LED strip: Yes
• Buzzer: Yes
• Barometer: DPS310
• Connector: Micro-USB
• OSD: IFLIGHT OSD (AT745E)
• Flight control firmware: IFLIGHT_BLITZ_F7_AIO
• Smartaudio / IRC Tramp VTX protocol supported
• ESC MCU: BB21
• Driver: FD6288
• Input voltage: 2-6S, supports LIHV battery
• Output current: 55A, peak value 65A (10 seconds)
• ESC firmware: Q-H-40 – Bluejay, 0.16, 24kHz
• Current sensor: Ratio 200 (1/10mV/A)
• Bidirectional DShot: Yes (requires Bluejay firmware)
• Supports DShot150/300/600/MultiShot/OneShot