Description
- Lynxmotion SES-V2 LED Board w/ 3s 11.1V 3300mAh Li-ion Battery
- LSS mounting pattern
- LED lighting for your Lynxmotion SES V2 projects
- Two power options: LSS bus or 3S Lithium balance port
- Operating voltage: 12V
- White ~308.8 lumen general purpose LED
- 3300mAh 11.1V, 3S Li-ion battery
The Lynxmotion SES-V2 LED Board w/ 3s 11.1V 3300mAh Li-ion Battery is intended to add lighting to your servo erector set (SES) v2 project and include a battery for convenient powering. The module is meant to be connected to the standard mounting of a Lynxmotion Smart Servo (LSS) Motor and can be added to the serial bus.
Like the LSS which can be operated over a range of input voltages, this LED module is meant to operate between 6 V and 12 V. The module can be powered in one of two ways where the onboard switch selects which of the two sources powers the LED:
Four-pin LSS bus (Tx, GND, 12V, Rx)
Four-pin, three cell Lithium balance port (3 individual cells = 11.1V)
View moreWhat’s Included
- 1x Lynxmotion (LSS) – LED Module
- 2x 2-56 x 1/4 in Phillips Pan Head Screw
- 1x 3s 11.1V 3300mAh Li-ion Battery
Dimensions
Lynxmotion (LSS) – LED Module
Links
Websites
- Lynxmotion SES-V2 LSS-LED Board Information & Guides
- Lynxmotion Servo Erector Set V2 (LSS)
Similar Item
- Lynxmotion (LSS) – LED Module & 3s 11.1V 4000mAh LiPo Battery
Specifications
Lynxmotion (LSS) – LED Module
- Input Voltage: 12 V Nominal (6.4 V to 18 V)
- Connections:
LSS Connector (Molex 99990988)
Lithium balance port (JST B4B-XH-A)
- LED: Everlight 37-21S (~38 lumen white LED)
- Current: ~100 mA
Battery
- Voltage: 11.1V
- Number of cells: 3
- Capacity: 3300 mAh
- Chemistry: Lithium Ion
- Connector: XT60
- Size (excluding wiring): 70 x 55 x 19 mm / 2.75 x 2.17 x 0.75 in
Unconditional Satisfaction Guarantee
