Lynxmotion SES-V2 LED Board for 12V Lithium Batteries for LSS (LSS-LED)

Description

• Lynxmotion SES-V2 LED Board for 12V Lithium Batteries for LSS (LSS-LED)
• LSS mounting pattern
• LED lighting for your Lynxmotion SES V2 projects
• Two power options: LSS bus or 3S Lithium balance port
• Operating voltage: 12V
• White ~308.8 lumen general purpose LED

TheLynxmotion SES-V2 LED Board for 12V Lithium Batteries for LSS (LSS-LED)is intended to add lighting to your servo erector set (SES) v2 project. The module is meant to be connected to the standard mounting of an Lynxmotion Smart Servo (LSS) Motor and can be added to the serial bus.

Like the LSS which can be operated over a range of input voltages, this LED module is meant to operate between 6 V and 12 V.The module can be powered one of two ways where the onboard switch selects which of the two sources powers the LED:

Four-pin LSS bus (Tx, GND, 12V, Rx)

Four-pin, three cell Lithium balance port (3 individual cells = 11.1V)

View moreWhat’s Included

• 1x Lynxmotion (LSS) – LED Module
• 2x 2-56 x 1/4 inch Phillips Pan Head Screw

Dimensions

Links

Websites

• Lynxmotion SES-V2 LSS-LED Board Information & Guides
• Lynxmotion Servo Erector Set V2 (LSS)

Included In

• Lynxmotion (LSS) – LED Module & 3s 11.1V 3300mAh Li-ion Battery
• Lynxmotion (LSS) – LED Module & 3s 11.1V 4000mAh LiPo Battery

Specifications

• Input Voltage: 12 V Nominal (6.4 V to 18 V)
• Connections:

LSS Connector (Molex 99990988)
Lithium balance port (JST B4B-XH-A)

• LED: Everlight 37-21S (~38 lumen white LED)
• Current: ~100 mA